Tank Monitoring Input Attributes

Tank Monitoring Tank Input Attributes are configured in the Tank Monitoring Configuration window under the Tank Input Attributes tab, as shown in the following figure. These attributes must be configured as input for the Tank Monitoring Analysis Rule.

The following table provides descriptions of the tank input attributes for the Tank Monitoring Analysis Rule.

Analysis Configuration - Required Input Attributes

Attribute Name	Description
Rate Dead Bank	A tank attribute that contains the Dead Band of rate.
Monitoring Flag	A tank attribute that enables tank monitoring.
Tank Weight	A tank attribute with the Net Weight of Material in the Tank.
Tank Volume	A tank attribute with the Net Volume of Material in the Tank.
Maximum Volume	A tank attribute with the Maximum tank capacity.
Minimum Volume	A tank attribute with the Minimum tank capacity.
Previous Volume	A tank attribute with the Net Volume of Material in the Tank at the Start Time of the analysis.
Density	A tank attribute containing the density value.

The following table provides the properties of the input attributes that must be configured for the Tank Monitoring Analysis Rule.

Analysis Configuration - Required Input Attributes Properties

Attribute Name	Unit Class	Default Name	Parameter Value Type
Rate Dead Band	Volume Flow Rate Limit for alarm condition	RateDeadband	Double
Monitoring Flag	Dimensionless	TankMonitoringFlag	Boolean
Tank Weight	Mass	NetWeight	Double
Tank Volume	Volume	NetVolume	Double
Maximum Volume	Volume	Maximum	Double
Minimum Volume	Volume	Minimum	Double
Previous Volume	Volume	NetVolume_OPEN	Double
Density	Density	Density	Double